PERGOLAS PERGOSPEKTAR
The pergolas of this family were developed by the design department of CORAL SPECTAR, in accordance with the current standards for safety, performance characteristics and wind loads (BDS EN 61310-1, BDS EN 60335-2, BDS EN ISO 12100, BDS EN 13561).
About the model
Feature
The pergolas of this family were developed by the design department of CORAL SPECTAR, in accordance with the current standards for safety, performance characteristics and wind loads (BDS EN 61310-1, BDS EN 60335-2, BDS EN ISO 12100, BDS EN 13561). Aluminum castings and profiles are made of aluminum alloys with certified mechanical characteristics and composition. Plastic parts are made of appropriately selected structural plastic granules - polyamide, polycarbonate, polycarbonate/ABS - all materials are UV stabilized and certified (UL 94 and UL 746 B). Fasteners are made of stainless steel. Mechanical processing and internal - workshop assembly in the production facility are regulated by the procedures of the Quality Management System ISO 9001:2015 and performance is declared according to the BDS EN 13561:2015 standard. The products are tested for wind load according to the methodology of the BDS EN 1932 standard.
Varieties
Models
Model C135 SALOON is based on model C130 VERANDA, with a completely ready-made structure for side closure. Other models can also be closed, but after installing additional elements. The closure can be performed with vertical panels model P110 or with aluminum profiles and glazing.
Model C123 AIR has a built-in aluminum gutter and this distinguishes it from the model C124 AIR.
The pergolas are attached at their rear end to the facade or to an existing or additionally manufactured steel structure. Anti-corrosion and decorative coating: electrostatic powder coating. The steel parts are pre-galvanized before applying the paint. Standard color - white RAL 9010.
Drive: with 1 or 2 Somfy motors, with a system of timing belts, driving, holding and stopping carriages. Drive control: with 1 motor – radio control, with 2 motors – with a button.
Cover: Made of "blackout" - a three-layer PVC material supplied by SATTLER.
Options: painting in another RAL color, roof panel, closing with panels or glazing, doors, radio control for 2 motors, sensors for automatic control, etc.
Maximum dimensions:
- for models C120 RELAX and C121 ROOF: width L x projection B: 4.50 m x 6.00 m – with two guides; 8.00 m x 6.00 m – with three guides; 12.00 m x 6.00 m – with four guides;
- for models C123 AIR and C124 AIR: width L x projection B: 4.50 m x 5.00 m – with two guides; 8.00 m x 5.00 m – with three guides; 12.00 m x 5.00 m – with four guides;
- for models C130 VERANDA, C131 ROOF and C135 SALOON: width L x projection B: 4.50 m x 7.50 m – with two guides; 8.00 m x 7.50 m – with three guides; 12.00 m x 7.50 m – with four guides.
